Starter Bundle SAVE 15%

Starter Bundle (for vehicles without a ceramic coating)

SAVE 15% WHEN YOU BUY THIS BUNDLE USE CODE: WSB1 at checkout.

This starter bundle is designed to give you the shine you want whilst at the same time protect your vehicle like no other set of products. Simple and safe to use if you like washing your vehicle then you will like how this set performs.

Protection

The Luxury Shampoo is designed to remove all the dirt in a first wash, a concentrated very glossy texture dilutes down to the desired amount (usually around 10% of the quantity per wash). 

Once you have completed your first wash, wash the vehicle again with Silica Soap Ceramic Wash. This wash isn't very soapy, it has a unique purpose of activating the clear coat surface and preparing for the next step. 

Once you have completed the second wash and the vehicle is dry use the Prime Polish. This amazing polish only removes (cuts) down to road grime and doesn't harm your clear coat. Then as it hazes like a polish on the panel it starts to absorb into the clear coat adding protection by nourishing the clear coat and introducing additional Ultra Violet (UV) protection in the process. Prime Polish absorbs at its own rate depending on the clear coat so using too much product would be a waste, you only need to apply enough to haze the panel. 

Once polished and buffed to a shine apply AquaBead, this protects the polish by layering on top of the clear coat. It's been specifically formulated to cure over 24 hours once applied, it's a simple spray and wipe on/off process or spray and rinse off. AquaBead strengthens the vehicles shine whilst allowing the Prime Polish time to absorb further into the clear coat and vehicle paint nourishing both.

To finish go around the vehicle applying the Glass Cleaner removing any spotting on the glass. This anti-smearing cleaner provides a thin coat and can be used inside and outside the vehicle with no visibility issues.

The Benefit

Waxes and cutting compounds reduce your protective clear coat and after time the clear coat starts to breakdown. Using the technology above and simple process you stop the clear coat from breaking down and start to nourish it keeping the protection you have consistent. UV is added to the process each wash and polish strengthening the clear coat's resilience. The vehicle after just a few wash and polishes starts to react positively with a ceramic style shine to the point that between washes you can just hose or lance off the dirt as it sits on top of the AquaBead coating with clean water and the protection remains. Use this process on wheels, it stops the brake dust from embedding into the rims making removal easier and without using harsh products all the time.

Our formulation is unique, we only manufacture under our own Waxedshine brand we don't manufacture for anyone else and all our formulations are manufactured by us.

Important: For best results avoid washing and polishing your vehicle in direct sunlight.

How To Use:

Step 1 Luxury Shampoo

• Wet or rinse the vehicle with clean water using a lance to remove excess dirt
• Dilute approximately 10% of the product into either a bucket adding warm water or in a foam cannon.
• Using a clean wash mitt gently without putting too much pressure on the vehicles surface wash the rest of the dirt away. 
• Rinse with a hose or lance using clean water an repeat if required.

Step 2 Silica Soap

• Wet the surface of the vehicle  with clean water
• Using a bucket add roughly 10% of the product to clean warm water
• Using a clean wash mitt wash the vehicle all over leaving the wheels until last
• your vehicle won't be soapy but the application prepares the clear coat either for a Prime Polish application or adds its own layer thin surface only layer of protection when not using Prime Polish in the wash process.
• Rinse off with clean water and leave to dry or using a clean drying towel to speed up the process.

Step 3 Prime Polish

• initially use once a month for 3 to 4 months then upto once a quarter
• Using a clean microfibre cloth apply a small amount of polish to the cloth and spread over one panel at a time.
• Wait until the panel hazes before buffing off with a second clean microfibre cloth, if you see any missed areas in the haze simply re-apply a small amount of Prime Polish.
• Once buffed move around the vehicle one panel at a time.
• Apply the same technique to the wheel rims (last).

Step 4 AquaBead (Spayer included)

• Spray AquaBead on to a damp clean microfibre cloth and apply like the polish
• Buff to a shine using a second clean microfibre cloth or alternatively you can rinse off the AquaBead with clean water.
• Once applied the vehicle can be left outside whilst the AquaBead is curing.
• Apply AquaBead to the wheel rims (last) and buff to a shine.

Step 5 Glass Cleaner

• Using a clean microfibre cloth spray into the cloth the Glass Cleaner and wipe all over the area
• Buff to a shine using a clean microfibre cloth.

Once these steps have been completed your vehicle will be protected between washes. If you are washing your vehicle and not adding the Prime Polish then continue with each step but simply miss out Step 3.